Dell PowerConnect 5424 Command Line Interface Guide

448 User Interface
Example
The following example enables the debug command interface.
show history
The show history User EXEC mode command lists the commands entered in the current session.
Syntax
•show history
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command mode.
User Guidelines
• The commands are listed from the first to the latest command.
• The buffer is kept unchanged when entering to configuration mode and returning back.
• The command in the buffer includes the commands that were not executed.
Example
The following example displays all the commands entered while in the current privileged EXEC mode.
console(config)#
console# debug
>debug
Enter DEBUG Password: *****
DEBUG>
Console# show history
show version
show clock
show history
5400_CLI.book Page 448 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation