Command Groups 55
TACACS Commands
TIC Commands
show users Lists the open Telnet sessions. User EXEC
show sessions Lists the open Telnet sessions User EXEC
show system Displays system information. User EXEC
set system Activates/deactivates specified features. Priviledged EXEC
show system mode Displays information on features control User EXEC
show version Displays the system version information. User EXEC
asset-tag Specifies the device asset-tag. Global
Configuration
show system id Displays the service ID information. User EXEC
Command Group Description Mode
tacacs-server host Specifies a TACACS+ host. Global
Configuration
tacacs-server key Sets the authentication encryption key used for all
TACACS+ communications between the device
and the TACACS+ daemon.
Global
Configuration
tacacs-server source-ip Specifies the source IP address that will be used for
the communication with TACACS servers.
Global
Configuration
show tacacs Displays configuration and statistics for a
TACACS+ servers.
Privileged User
EXEC
Command Group Description Access Mode
The following example
displays the local users
configured with access to
the system.passwords min-
length
Configures the minimal length required for passwords in
the local database.
Global
Configuration
passwords aging Configures the aging time of line passwords. Line
Configuration
passwords aging Configures the aging time of username passwords and
enables passwords.
Global
Configuration
passwords history Configures the number of password changes that are
required before a password in the local database can be
reused.
Global
Configuration
5400_CLI.book Page 55 Wednesday, December 17, 2008 4:33 PM