Web Server 485
ip https certificate
The ip https certificate Global Configuration mode command configures the active certificate for
HTTPS. Use the no form of this command to return to default.
Syntax
•
ip https certificate
number
• no ip https certificate
•
number
— Specifies the certificate number. (Range: 1 - 2)
Default Configuration
Certificate number 1.
Command Mode
Global Configuration mode.
User Guidelines
• The
crypto certificate generate
command should be used in order to generate HTTPS certificates.
Example
The following example configures the active certificate for HTTPS.
crypto certificate import pkcs12
The crypto certificate import pkcs12 Privileged EXEC mode command, imports the certificate and the
RSA keys within a PKCS12 file.
Syntax
•
crypto certificate
number
import pkcs12
passphrase
•
number
— Specifies the certificate number. (Range: 1 - 2)
•
passphrase
— Passphrase that is used to encrypt the PKCS12 file for export. (Range: 8 - 96)
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
• The passphrase that was exported by the
crypto certificate export pkcs12
command should be used.
Please note that this passphrase would be saved for later exports.
Console (config)# ip https certificate 1
5400_CLI.book Page 485 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
