LACP Commands 245
show lacp ethernet
The show lacp ethernet Privilege EXEC mode command displays LACP information for Ethernet ports.
Syntax
•
show lacp ethernet
interface
[
parameters
|
statistics
|
protocol-state
]
•
Interface
— Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example shows how to display LACP statistics information.
show lacp port-channel
The show lacp port-channel Privileged EXEC mode command displays LACP information for a port-
channel.
Syntax
•
show lacp port-channel
[
port_channel_number
]
•
port_channel_number
— The port-channel number.
Default Configuration
This command has no default configuration.
Console# show lacp ethernet g1 statistics
Port g1 LACP Statistics:
LACP PDUs sent:2
LACP PDUs received:2
5400_CLI.book Page 245 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
