Command Groups 41
GVRP Commands
IGMP Snooping Commands
Command Group Description Mode
gvrp enable (global) Enables GVRP globally. Global Configuration
gvrp enable (interface) Enables GVRP on an interface. Interface
Configuration
garp timer Adjusts the GARP application join, leave,
and leaveall GARP timer values.
Interface
Configuration
gvrp vlan-creation-forbid Enables or disables dynamic VLAN creation. Interface
Configuration
gvrp registration-forbid De-registers all VLANs, and prevents dynamic
VLAN registration on the port.
Interface
Configuration
clear gvrp statistics Clears all the GVRP statistics information. Privileged User EXEC
show gvrp configuration Displays GVRP configuration information. User EXEC
show gvrp statistics Displays GVRP statistics. User EXEC
Command Group Description Access Mode
ip igmp snooping (Global) Enables Internet Group Management Protocol (IGMP)
snooping.
Global
Configuration
ip igmp snooping (Interface) Enables Internet Group Management Protocol (IGMP)
snooping on a specific VLAN.
VLAN
Configuration
ip igmp snooping mrouter Enables automatic learning of Multicast router ports in
the context of a specific VLAN.
VLAN
Configuration
ip igmp snooping host-time-out Configures the host-time-out. VLAN
Configuration
ip igmp snooping mrouter-time-out Configures the mrouter-time-out. VLAN
Configuration
ip igmp snooping leave-time-out Configures the leave-time-out. VLAN
Configuration
show ip igmp snooping mrouter Displays information on dynamically learned Multicast
router interfaces.
User EXEC
show ip igmp snooping interface Displays IGMP snooping configuration. User EXEC
show ip igmp snooping groups Displays Multicast groups learned by IGMP snooping. User EXEC
5400_CLI.book Page 41 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
Need help?
General
