Dell PowerConnect 5424 - 10 Ethernet Configuration Commands; Interface Ethernet; Interface Range Ethernet

Ethernet Configuration Commands 151
Ethernet Configuration Commands
interface ethernet
The interface ethernet Global Configuration mode command enters the Interface Configuration
mode to configure an Ethernet type interface.
Syntax
• interface ethernet interface
• interface — Valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example enables port g8 for configuration.
interface range ethernet
The interface range ethernet Global Configuration mode command enters the Interface
Configuration mode to configure multiple Ethernet type interfaces.
Console(config)# interface ethernet g8
Console(config-if)#
5400_CLI.book Page 151 Wednesday, December 17, 2008 4:33 PM