Dell PowerConnect 5424 Command Line Interface Guide

802.1x Commands 503
The following table describes the significant fields shown in the display.
show dot1x statistics
The show dot1x statistics Privileged EXEC mode command displays 802.1X statistics for the specified
interface.
Syntax
• show dot1x statistics ethernet interface
• interface — The full syntax is: port .
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Field Description
Username The User-Name representing the identity of the Supplicant.
Login Time How long the user is logged in.
Last Authentication Time since last authentication.
Authentication Method The authentication method used to establish the session.
Mac address The supplicant MAC address.
Interface The interface that the user is using.
5400_CLI.book Page 503 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation