Clock 131
sntp client enable
The sntp client enable Global Configuration mode command enables the Simple Network Time
Protocol (SNTP) Broadcast and Anycast client on an interface. Use the no form of this command to
disable the SNTP client.
Syntax
•
sntp client enable
{
ethernet
interface-number
|
vlan
vlan-id
|
port-channel
number
}
•
no sntp client enable
{
ethernet
interface-number
|
vlan
vlan-id
|
port-channel
number
}
•
ethernet
interface-number
— Ethernet port number.
•
vlan
vlan-id
— Vlan number.
•
port-channel
number
— Port channel number.
Default Configuration
The SNTP clien
it is disabled.
Command Mode
Global Configuration mode.
User Guidelines
• Use the
sntp Broadcast client enable
Global Configuration mode command to enable Broadcast
clients globally.
• Use the
sntp anycast client enable
Global Configuration mode command to enable Anycast clients
globally.
Examples
The following example enables the SNTP client on the interface.
sntp client enable (interface)
The sntp client enable Interface Configuration mode command enables the Simple Network Time
Protocol (SNTP) client on an interface. This applies to both receive Broadcast and Unicast updates.
Use the no form of this command to disable the SNTP client.
Syntax
• sntp client enable
• no sntp client enable
This command has no arguments or keywords.
Console (config)# sntp client enable
5400_CLI.book Page 131 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
