Dell PowerConnect 5424 Command Line Interface Guide

User Interface 449
show privilege
The show privilege User EXEC mode command displays the current privilege level.
Syntax
• show privilege
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the current privilege level.
do
The do EXEC-level command executes a Global Configuration mode or any configuration submode.
Syntax
• do command
Default Configuration
This command has no default configuration.
Command Mode
All configuration modes.
User Guidelines
• There are no user guidelines for this command.
Console# show privilege
Current privilege level is 15
5400_CLI.book Page 449 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation