62 Command Groups
802.1x Advanced Commands
dot1x auth-not-req Enables unauthorized users access to that VLAN. VLAN
Configuration
dot1x multiple-hosts Allows multiple hosts (clients) on an 802.1X-authorized
port with the dot1x port-control Interface Configuration
mode command set to auto.
Interface Config-
uration
(Ethernet)
dot1x single-host-
violation
Configures the action to be taken when a station of which
the MAC address is not the supplicant MAC address
attempts to access the interface.
Interface Config-
uration
(Ethernet)
dot1x guest-vlan Defines a Guest VLAN. Use the no form of this command
to return to default.
Interface Config-
uration (VLAN)
dot1x guest-vlan enable Enables unauthorized users on the interface access to the
Guest VLAN.
Interface Config-
uration
(Ethernet)
dot1x mac-
authentication
Enables authentication based on the station’s MAC
address.
Interface
Configuration
dot1x traps mac-
authentication failure
Enables sending traps when a MAC address was failed in
authentication of the 802.1X MAC authentication access
control.
Global
Configuration
dot1x radius-attributes
vlan
Enables user-based VLAN assignment. Interface
Configuration
show dot1x advanced Displays 802.1X advanced features for the switch or for the
specified interface.
Privileged EXEC
5400_CLI.book Page 62 Wednesday, December 17, 2008 4:33 PM