SSH Commands 377
SSH Commands
ip ssh port
The ip ssh port Global Configuration mode command specifies the port to be used by the SSH
server. Use the no form of this command to use the default port.
Syntax
•
ip ssh port
port-number
• no ip ssh port
•
port-number
— Port number for use by the SSH server. (Range: 1 - 65535)
Default Configuration
The default value is 22.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example specifies the port to be used by the SSH server as 8080.
ip ssh server
The ip ssh server Global Configuration mode command enables the device to be configured from a
SSH server. Use the no form of this command to disable this function.
Syntax
• ip ssh server
• no ip ssh server
Console (config)# ip ssh port 8080
5400_CLI.book Page 377 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
