Dell PowerConnect 5424 Command Line Interface Guide

44 Command Groups
iSCSI Commands
LACP Commands
Line Commands
Command Group Description Access Mode
iscsi enable
Globally enables iSCSI awareness.
Global
Configuration
iscsi target port Configures iSCSI port(s), target address and name. Global
Configuration
iscsi cos Sets the quality of service profile applied to iSCSI
flows.
Global
Configuration
iscsi aging time
Sets aging time for iSCSI sessions.
Global
Configuration
iscsi max connections Sets the maximum number of iSCSI connections that
can be supported
Global
Configuration
show iscsi Displays the iSCSI settings Privileged User
EXEC
show iscsi sessions Display the iSCSI sessions Privileged EXEC
Command Group Description Access Mode
lacp system-priority Configures the system LACP priority. Global
Configuration
lacp port-priority Configures the priority value for physical ports. Interface
Configuration
lacp timeout Assigns an administrative LACP timeout. Interface
Configuration
show lacp ethernet Displays LACP information for Ethernet ports. User EXEC
show lacp port-channel
Displays LACP information for a port-channel. User EXEC
Command Group Description Access Mode
line Identifies a specific line for configuration and enters
the Line Configuration command mode.
Global
Configuration
speed Sets the line baud rate. Line Configuration
autobaud
Sets the line for automatic baud rate detection
Line Configuration
5400_CLI.book Page 44 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation