Dell PowerConnect 5424 - Show Ports Security

Address Table Commands 111
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
In this example, the Multicast configuration for VLAN 1 is displayed.
show ports security
The show ports security Privileged EXEC mode command displays the port-lock status.
Syntax
• show ports security [ ethernet interface | port-channel port-channel-number ]
• interface — A valid Ethernet port .
• port-channel-number — A valid port-channel number .
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Console # show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port Static Status
------- ----------------- -----------
g1 Forbidden Filter
g2 Forward Forward(s)
g3 - Forward(d)
5400_CLI.book Page 111 Wednesday, December 17, 2008 4:33 PM