Dell PowerConnect 5424 - Name (Mst); Revision (Mst)

Spanning-Tree Commands 359
name (mst)
The name MST Configuration mode command defines the configuration name. Use the no form of this
command to return to the default setting.
Syntax
• name string
• no name
• string — MST configuration name and is case-sensitive. (Range: 1 - 32 characters)
Default Setting
The default name is a bridge ID.
Command Mode
MST Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example defines the configuration name as region1.
revision (mst)
The revision MST Configuration command defines the configuration revision number. Use the no form
of this command return to the default configuration.
Syntax
• revision value
• no revision
• value — Configuration revision number. (Range: 0 - 65535)
Default Setting
The default configuration revision number is 0.
Command Mode
MST Configuration mode.
Console(config) # spanning-tree mst configuration
Console(config-mst) # name region 1
5400_CLI.book Page 359 Wednesday, December 17, 2008 4:33 PM