84 ACL Commands
show interfaces access-lists
The show interfaces access-lists Privileged EXEC mode command displays access lists applied on
interfaces.
Syntax
•
show interfaces access-lists
[
ethernet
interface
|
port-channel
port-channel-number
]
•
interface
— Specifies the Valid Ethernet port.
•
port-channel-number —
Specifies the port-channel index.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displaynews ACLs applied to the interfaces of a device.
Console# show interfaces access-lists
Interface Input ACL
--------- --------- ---------
g1 ACL1 ACL2
g2 ACL3 ACL4
5400_CLI.book Page 84 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
