TIC Commands 431
show users login-history
The show users login-history Privileged EXEC mode command displays information about the login
history of users.
Syntax
•
show users login-history [username
name
]
•
name
— The name of the user. (Range 1 - 20 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Example
The following example displays the login history of users.
Lockout If lockout control is enabled, it specifies how many times a user has failed to
enter the correct password since the last successful login. If the password is
locked out it specifies “LOCKOUT”.
Line Configuration and status for specific line password.
Console# show users login-history
Login Time Username Protocol Location
-------------- -------- -------- --------
Jan 18 2004 23:58:17 Robert HTTP 172.16.1.8
Jan 19 2004 07:59:23 Robert HTTP 172.16.0.8
Jan 19 2004 08:23:48 Bob Serial
Jan 19 2004 08:29:29 Robert HTTP 172.16.0.8
Jan 19 2004 08:42:31 John SSH 172.16.0.1
Jan 19 2004 08:49:52 Betty Telnet 172.16.1.7
5400_CLI.book Page 431 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
