SNMP Commands 335
Examples
The following example sets the scalar MIB "sysName" to have the value "dell".
The following example sets the entry MIB "rndCommunityTable" with keys 0.0.0.0 and "public". The
field rndCommunityAccess gets the value "super" and the rest of the fields get their default values.
snmp-server group
The snmp-server group Global Configuration mode command configures a new Simple Network
Management Protocol (SNMP) group, or a table that maps SNMP users to SNMP views. Use the no
form of this command to remove a specified SNMP group.
Syntax
•
snmp-server group
groupname {
v1
|
v2
|
v3
{
noauth
|
auth
|
priv
} [
notify
notifyview ] } [
read
readview] [
write
writeview]
•
no snmp-server group
groupname [
v1
|
v2
|
v3
[
noauth
|
auth
|
priv
]]
•
groupname
— The name of the group. (Range: Up to 30 characters)
•
v1
— SNMP
Version 1 security model.
•
v2
— SNMP
Version 2 security model.
•
v3
— SNMP
Version 3 security model.
•
noauth
— Specifies no authentication of a packet. Applicable only to SNMP
Version 3 security model.
•
auth
— Specifies authentication of a packet without encrypting it. Applicable only to SNMP
Version 3 security model.
•
priv
— Specifies authentication of a packet with encryption. Applicable only to SNMP
Version 3
security model.
•
read
readview
— A
string that is the name of the view that enables you only to view the contents of
the agent. If unspecified, all the objects except of the community-table and SNMPv3 user and
access tables are available. (Range: Up to 30 characters)
•
write
writeview
— A string that is the name of the view that enables you to enter data and
configure the contents of the agent. If unspecified, nothing is defined for the write view.
(Range:
Up to 30 characters)
•
notify notifyview
— A string that is the name of the view that enables you to specify an inform or
a trap. If unspecified, nothing is defined for the notify view. (Range: Up to 30 characters)
Console (config)# snmp-server set sysName sysname dell
Console (config)# snmp-server set rndCommunityTable
rndCommunityMngStationAddr 0.0.0.0 rndCommunityString public
rndCommunityAccess super
5400_CLI.book Page 335 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
