412 System Management
User Guidelines
• There are no user guidelines for this command.
Example
show sessions
The show sessions User EXEC mode command lists the open Telnet sessions.
Syntax
• show sessions
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
User
EXEC mode.
User Guidelines
1
Open telnet session from PC 5400 to other device.
2
In the other device syntax, press
Cntrl-shift-t-X
3
Enter the command
show session
. The number of sessions opened from PC 5400 is displayed.
4
Enter the command
resume [number of session]
to return to the relevant telnet session.
Console> show users
Username Protocol Location
Bob Serial
John SSH 172.16.0.1
Robert HTTP 172.16.0.8
Betty Telnet 172.16.1.7
5400_CLI.book Page 412 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
