380 SSH Commands
User Guidelines
• There are no user guidelines for this command.
Example
The following example enables public key authentication for incoming SSH sessions.
crypto key pubkey-chain ssh
The crypto key pubkey-chain ssh Global Configuration mode command enters SSH Public Key-chain
Configuration mode. The mode is used to manually specify other device public keys such as SSH client
public keys.
Syntax
• crypto key pubkey-chain ssh
Default Configuration
By default, there are no keys.
Command Mode
Global Configuration mode.
User Guidelines
• Use this command to enter
Public Key-chain Configuration mode
.
• This command can also be used when you need to manually specify SSH client’s public keys.
Example
The following example enters the SSH Public Key-chain Configuration mode.
user-key
The user-key SSH Public Key Chain Configuration mode command specifies which SSH public key is
manually configured and enters the SSH Public Key-chain Configuration mode command. Use the no
form of this command to remove a SSH public key.
Console (config)# ip ssh pubkey-auth
Console(config)# crypto key pubkey-chain ssh
Console(config-pubkey-chain)#
5400_CLI.book Page 380 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
