38 Command Groups
Configuration and Image Files Commands
sntp unicast client enable
Enables the device to use the SNTP to request and
accept NTP traffic from servers.
Global
Configuration
sntp unicast client poll
Enables polling for the SNTP predefined Unicast
clients.
Global
Configuration
sntp server
Specifies SNTP UDP port of the SNTP server
Global
Configuration
show clock
Displays the time and date from the system clock.
User EXEC
show sntp configuration
Shows the configuration of the SNTP.
Privileged User
EXEC
show sntp status
Shows the status of the SNTP.
Privileged User
EXEC
Command Group Description Access Mode
dir Displays list of files on a flash file system Privileged User
EXEC
more Displays a file Privileged EXEC
rename Renames a file. Privileged User
EXEC
delete startup-config Deletes the startup-config file. Privileged User
EXEC
copy Copies files from a source to a destination. Privileged User
EXEC
delete Deletes a file from a Flash memory device. Privileged User
EXEC
boot system Specifies the system image that the device loads at
startup.
Privileged User
EXEC
show running-config Displays the contents of the currently running
configuration file.
Privileged User
EXEC
show startup-config Displays the startup configuration file contents. Privileged User
EXEC
show bootvar Displays the active system image file that the device
loads at startup.
Privileged EXEC
5400_CLI.book Page 38 Wednesday, December 17, 2008 4:33 PM