Dell PowerConnect 5424 - Login Banner Commands; Management ACL Commands

46 Command Groups
Login Banner Commands
Management ACL Commands
lldp med network-policy
(interface)
Attaches a LLDP MED network policy to a port. Interface
Configuration
(Ethernet)
lldp med location Configures location information for the LLDP MED for an
interface.
Interface
Configuration
(Ethernet)
clear lldp rx Restarts the LLDP RX state machine and clearing the
neighbors table.
Privileged EXEC
show lldp configuration Displays the LLDP configuration. Privileged EXEC
show lldp local Displays the LLDP information that is advertised from a
specific port.
Privileged EXEC
show lldp neighbors Displays information about neighboring devices discovered
usingLLDP.
Privileged EXEC
show lldp med
configuration
Displays the LLDP MED configuration. Privileged EXEC
Command Group Description Access Mode
banner exec Specifies and enables a message to be displayed when
an EXEC process is created.
Global
Configuration
banner login Enables a message to be displayed before the
username and password login prompts.
Global
Configuration
banner motd Specifies and enables a message-of-the-day banner.. Global
Configuration
exec-banner Enables the display of exec banners. Line Configuration
login-banner Enables the display of login banners. Line Configuration
motd-banner Enables the display of message-of-the-day banners. Line Configuration
show banner Displays the banners configuration. Privileged EXEC
Command Group Description Access Mode
management access-list Defines a management access-list, and enters the access-
list for configuration.
Global
Configuration
permit (management) Defines a permit rule. Management
Access-level
5400_CLI.book Page 46 Wednesday, December 17, 2008 4:33 PM