VLAN Commands 451
VLAN Commands
vlan database
The vlan database Global Configuration mode command enters the VLAN Database
Configuration mode.
Syntax
• vlan database
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example enters the VLAN database mode.
vlan
Use the vlan VLAN Configuration mode command to create a VLAN. Use the no form of this
command to delete a VLAN.
Syntax
•
vlan
{
vlan-range
}
•
no vlan
{
vlan-range
}
•
vlan-range
— A list of valid VLAN IDs to be added. List separate, non-consecutive VLAN IDs
separated by commas (without spaces); use a hyphen to designate a range of IDs.
(Range: 2 - 4094)
Console (config)# vlan database
Console (config-vlan)#
5400_CLI.book Page 451 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
