IP Addressing Commands 215
clear host
The clear host Privileged EXEC mode command deletes entries from the host name-to-address cache.
Syntax
•
clear host
{
name
|
*
}
•
name —
Particular host entry to remove. (Range: 1 - 158 characters
)
• * — Removes all entries.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Examples
The following example deletes entries from the host name-to-address cache.
show hosts
The show hosts User EXEC mode command displays the default domain name, a list of name server
hosts, the static and the cached list of host names and addresses.
Syntax
•
show hosts
[
name
]
•
name —
Name of the host. (Range: 1 - 158 characters)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Console (config)# clear host *
5400_CLI.book Page 215 Wednesday, December 17, 2008 4:33 PM