446 User Interface
Command Mode
Line Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example enables the command history function for telnet.
terminal datadump
The terminal datadump EXEC mode command enables dumping of all the output from the show
command without ’prompting’. Use the no form of this command to disable dumping.
Syntax
• terminal datadump
• no terminal datadump
Default Configuration
Data dump is disabled.
Command Mode
Privilege EXEC command mode.
User Guidelines
• By default when output continues beyond what is displayed on the screen, the CLI displays a
--More--
prompt. Pressing Return displays the next line; pressing the Spacebar displays the next output screen.
The datadump feature enables the dumping of all the output immediately after entering the show
command for the current terminal session.
Example
The following example enables dumping of all the output from show command without ’prompting’.
Console (config)# line telnet
Console (config-line)# history
console# terminal datadump
5400_CLI.book Page 446 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
