150 Configuration and Image
show bootvar
The show bootvar Privileged EXEC mode command displays the active system image file that the device
loads at startup.
Syntax
• show bootvar
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Examples
The following example displays the active system image file that the device loads at startup.
Console# show bootvar
Images currently available on the FLASH
image-1 active (selected for next boot)
image-2 not active
5400_CLI.book Page 150 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
