Dell PowerConnect 5424 Command Line Interface Guide

RMON Commands 325
rmon table-size
The rmon table-size Global Configuration mode command configures the maximum RMON tables
sizes. Use the no form of this command to return to the default configuration.
Syntax
• rmon table-size { history en.tries | log entries }
• no rmon table-size { history | log }
• history entries — Maximum number of history table entries. (Range: 20 - 32767)
• log entries — Maximum number of log table entries. (Range: 20 - 32767)
Default Configuration
History table size is 270.
Log table size is 200.
Command Mode
Global Configuration mode.
User Guidelines
• The configured table size is effective after the device is rebooted.
Example
The following example configures the maximum RMON history table sizes to 1000 entries.
Console (config)# rmon table-size history 1000
5400_CLI.book Page 325 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation