Dell PowerConnect 5424 Command Line Interface Guide

168 Ethernet Configuration Commands
Example
The following example displays the description for the interface g1.
show interfaces counters
The show interfaces counters User EXEC mode command displays traffic seen by the physical interface.
Syntax
show interfaces counters [ ethernet interface | port-channel port-channel-number ]
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
• There are no user guidelines for this command.
Console# show interfaces description ethernet g1
Port Description
---- ------------------
g1 Management_port
g2 R&D_port
g3 Finance_port
Ch Description
---- ------------------
Ch 1 Output
5400_CLI.book Page 168 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation