Dell PowerConnect 5424 Command Line Interface Guide

452 VLAN Commands
Default Configuration
This command has no default configuration.
Command Mode
VLAN Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example VLAN number 1972 is created.
interface vlan
The interface vlan Global Configuration mode command enters the Interface Configuration (VLAN)
mode.
Syntax
• interface vlan vlan-id
• vlan-id — The ID of an existing VLAN (excluding GVRP dynamic VLANs).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures the VLAN 1 IP address of 131.108.1.27 and subnet mask
255.255.255.0.
Console (config)# vlan database
Console (config-vlan)# vlan 1972
Console (config)# interface vlan 1
Console (config-if)# ip address 131.108.1.27 255.255.255.0
5400_CLI.book Page 452 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation