56 Command Groups
Tunnel Commands
passwords history hold-time Configures the duration of time a password is relevant
for tracking passwords history.
Global
Configuration
passwords lockout Enables lockout of a user account after a series of
authentication failures.
Global
Configuration
aaa login-history file Enables writing to login history file. Global
Configuration
set username active Reactivates a previously locked out user account. Privileged EXEC
set line active Reactivates a previously locked out line. Privileged EXEC
set enable-password active Reactivates a previously locked out password. Privileged EXEC
show passwords
configuration
Displays information about the passwords management
configuration.
Privileged EXEC
show users login-history Displays information about the login history of users. Privileged EXEC
Command Group Description Access Mode
interface tunnel Enters tunnel interface configuration mode. Global
Configuration
tunnel mode ipv6ip Configures an IPv6 transition mechanism global
support mode.
Interface Tunnel
Configuration
tunnel isatap router Configures a global string that represents a specific
automatic tunnel router domain name.
Interface Tunnel
Configuration
tunnel source Sets the local (source) tunnel interface IPv4 address. Interface Tunnel
Configuration
tunnel isatap query-interval Configures the interval between DNS Queries (before
the IP address of the ISATAP router is known) for the
automatic tunnel router domain name.
Global
Configuration
tunnel isatap solicitation-
interval
Configures the interval between ISATAP router
solicitations messages (when there is no active ISATAP
router).
Global
Configuration
tunnel isatap robustness Configures the number of DNS Query/Router
Solicitation refresh messages that the device sends.
Global
Configuration
show ipv6 tunnel Displays information on the ISATAP tunnel. Privileged EXEC
5400_CLI.book Page 56 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
