Command Groups 35
ACL Commands
AAA Commands
Command Group Description Access Mode
ip access-list Defines an IPv4 Access List and places the device in
IPv4 Access List Configuration mode.
Global
Configuration
mac access-list Enables the MAC-Access List Configuration mode and
creates Layer 2 ACLs.
Global
Configuration
permit (ip) Permits traffic if the conditions defined in the permit
statement match.
IP-Access List
Configuration
deny (IP) Denies traffic if the conditions defined in the deny
statement match.
IP-Access List
Configuration
permit (MAC) Defines permit conditions of an MAC ACL. MAC-Access List
Configuration
deny (MAC) Denies traffic if the conditions defined in the deny
statement match.
MAC-Access List
Configuration
service-acl Applies an ACL to the input interface.
Interface
Configuration
(Ethernet,
port-channel)
show access-lists Displays access control lists (ACLs) defined on the
device.
Privileged EXEC
show interfaces access-lists Displays access lists applied on interfaces.
Privileged EXEC
Command Group Description Access Mode
aaa authentication login Defines login authentication. Global
Configuration
aaa authentication enable Defines authentication method lists for accessing higher
privilege levels.
Global
Configuration
enable authentication Specifies the authentication method list when accessing
a higher privilege level from a remote telnet or console.
Line Configuration
ip http authentication Specifies authentication methods for http. Global
Configuration
ip https authentication Specifies authentication methods for https. Global
Configuration
show authentication
methods
Displays information about the authentication methods. Privileged User
EXEC
5400_CLI.book Page 35 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
Need help?
General
