72 Command Modes
SP (SSH Public Key) Mode
show fiber-ports optical-
transceiver
Displays the optical transceiver diagnostics.
show ip ssh Displays the SSH server configuration.
show ipv6 icmp error-interval
Displays
the IPv6 ICMP error interval setting
show ipv6 interface Displays the usability status of interfaces configured for IPv6.
show ipv6 neighbors Displays IPv6 neighbor discovery cache information.
show ipv6 route Displays the current state of the IPv6 routing table.
show ipv6 tunnel Displays information on the ISATAP tunnel.
show lacp port-channel Displays LACP information for a port-channel.
show logging Displays the state of logging and the syslog messages stored in the internal buffer.
show logging file Displays the state of logging and the syslog messages stored in the logging file.
show management access-class Displays the active management Access-List.
show management access-list Displays management access-lists.
show ports security Displays the port-lock status.
show ports storm-control Displays the storm control configuration.
show radius-servers Displays the RADIUS server settings.
show running-config Displays the contents of the currently running configuration file.
show snmp Displays the SNMP status.
show spanning-tree Displays spanning tree configuration.
show startup-config Displays the startup configuration file contents.
show syslog-servers Displays the syslog servers settings.
show system flowcontrol Displays the flow control state on cascade ports.
show tacacs Displays configuration and statistics for a TACACS+ servers.
show users accounts Displays information about the local user database.
test copper-port tdr Diagnoses with TDR (Time Domain Reflectometry) technology the quality and
characteristics of a copper cable attached to a port.
Command Description
key-string Manually specifies a SSH public key.
user-key Specifies which SSH public key is manually configured and enters the SSH public key-string
configuration command
5400_CLI.book Page 72 Wednesday, December 17, 2008 4:33 PM