176 Ethernet Configuration Commands
show system flowcontrol
The show system flowcontrol EXEC mode command displays the flow control state on cascade ports.
Syntax
show system flowcontrol
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
g9 Disabled 3500 Broadcast
g10 Disabled 3500 Broadcast
g11 Disabled 3500 Broadcast
g12 Disabled 3500 Broadcast
g13 Disabled 3500 Broadcast
g14 Disabled 3500 Broadcast
g15 Disabled 3500 Broadcast
g16 Disabled 3500 Broadcast
g17 Disabled 3500 Broadcast
g18 Disabled 3500 Broadcast
g19 Disabled 3500 Broadcast
g20 Disabled 3500 Broadcast
g21 Disabled 3500 Broadcast
g22 Disabled 3500 Broadcast
g23 Disabled 3500 Broadcast
g24 Disabled 3500 Broadcast
5400_CLI.book Page 176 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
