138 Clock
show sntp status
The show sntp status Privileged EXEC mode command shows the status of the Simple Network Time
Protocol (SNTP).
Syntax
• show sntp status
This command has no keywords or arguments.
Default Configuration
This command has no default configuration.
Command Mode
Privileged
EXEC mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows the status of the SNTP.
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server Preference Status Last response Offset
[mSec]
Delay
[mSec]
--------- ---------- ------ --------------- ----- ------
176.1.1.8 Primary Up AFE252C1.6DBDDFF2 7.33 117.79
176.1.8.179 Secondary Unknown AFE21789.643287C9 8.98 189.19
Broadcast:
Interface IP address Last response
--------- ---------- ------------------------
176.1.1.8 Primary AFE252C1.6DBDDFF2
176.1.8.179 Secondary AFE21789.643287C9
5400_CLI.book Page 138 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
