320 RMON Commands
Example
The following example displays RMON 1 alarms.
The following table describes the significant fields shown in the display:
Console# show rmon alarm 1
Alarm 1
-------
OID: 1.3.6.1.2.1.2.2.1.10.1
Last sample Value: 878128
Interval: 30
Sample Type: delta
Startup Alarm: rising
Rising Threshold: 8700000
Falling Threshold: 78
Rising Event: 1
Falling Event: 1
Owner: CLI
Field Description
OID Monitored variable OID.
Last Sample Value The statistic value during the last sampling period. For example, if the sample
type is delta, this value is the difference between the samples at the beginning
and end of the period. If the sample type is absolute, this value is the sampled
value at the end of the period.
Alarm Alarm index.
Owner The entity that configured this entry.
Interval The interval in seconds over which the data is sampled and compared with the
rising and falling thresholds.
Sample Type The method of sampling the variable and calculating the value compared against
the thresholds. If the value is absolute, the value of the variable is compared
directly with the thresholds at the end of the sampling interval. If the value is
delta, the value of the variable at the last sample is subtracted from the current
value, and the difference compared with the thresholds.
5400_CLI.book Page 320 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
