Dell PowerConnect 5424 Command Line Interface Guide

AAA Commands 91
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the authentication configuration.
Console# show authentication methods
Login Authentication Method Lists
-----------------------------------
Console_Default: None
Network_Default: Local
Enable Authentication Method Lists
-----------------------------------
Console_Default: Enable None
Network_Default: Enable
Line Login Method List Enable Method List
-------------- ----------------- ------------------
Console Default Default
Telnet Default Default
SSH Default Default
http : Tacacs Local
https : Tacacs Local
dot1x :
5400_CLI.book Page 91 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation