EDIUS — User Reference Guide 718
EDIUS SP/SP-SDI (SHX) Settings
11. Set the desired White Gain values with the drop-down lists and sliders.
• White Gain - Strengthens the gain in high luminance areas of the
luminance signal. This option improves gradation levels in areas
that appear washed out due to high luminance.
• Adaptation Level - not available if White Gain to "None.” Sets the
adjustment limit for white gain. A higher level results in less white
gain adjustment.
• Threshold - Not available if White Gain is set to "None.” Sets the
level of luminance towards which white gain will be adjusted. The
higher the number, the darker the level of white.
12. Click the Apply button to apply the changes.
13. Click on the “Outline Enhancement” tab. The dialog in Figure 868
appears.
Figure 868. Outline Enhancement Dialog
14. Select the desired Horizontal and Vertical outline enhancement settings
from the drop-down lists.
15. Click the OK button to save the settings and close the Image Adjustment
Settings dialog.
To Next Page
Loading...