iView - Controller View
9-30 Manual # 42-02-7223
Configuration - Car Operation
The Configuration > Car Operation tab is used to view and adjust car door and device behavior
under different operating modes. If you are viewing this as a PDF file, click the page number
link to jump to the description of the parameters on that tab. The car operation sub-tabs
include:
Table 9.4 Configuration - Car Operation Sub-tabs
Sub-tab Description See
Doors Door device bypass timers, door motor protection timers, and door
closing delay parameters.
page 9-31
Devices Arrival fixtures and emergency alarm monitoring parameters, plus
serial fixture and voice communicator parameters, and discrete PI
outputs.
page 9-35
Passenger Door opening and closing, photo eye, dwell timers, load weigher, car
delayed timer, and call cancel parameters.
page 9-41
Fire Service Applicable code Fire Service Recall and In-Car Firefighter's Service
parameters.
page 9-48
Independent Service Independent Service parameters. page 9-63
Elevator Recall Elevator recall switches configuration. page 9-65
Earthquake Applicable code and advanced EQ parameters. Counterweight device. page 9-68
EMS Emergency Medical Service operation parameters. page 9-70
Emergency power Emergency Power operating parameters. page 9-74
CFSS Commandeer for Special Service parameters. page 9-77
Flood Operation Determines car behavior during flood operation. page 9-80
Attendant service Attendant Service operation parameters. page 9-82
Auto stop Auto Stop operation parameters. page 9-83
Sabbath operation Sabbath operation parameters. page 9-85
Shuttle Service Shuttle service parameters page 9-88
Heat Detectors Heat Detector service parameters page 9-90
Jail Operation Jail Operation parameters page 9-91
To Next Page
Loading...
Need help?
General