iView - Controller View
9-46 Manual # 42-02-7223
Passenger - Door operation - Front / Rear tabs
The Configure > Car Operation > Passenger > Door operation > Front and Rear tabs determine
door behavior for front or rear doors while on Passenger (Norm) operation.
General
• Open doors for idle car: The car will park with doors open. If the parking option is not set,
the car will remain at the last floor answered with doors open.
• Open car gate if hoistway door open: The car gate will open if the hoistway door is open.
• DCF on between floors: Specifies that the door close function shall be on when the car is
not at a floor in non-inspection modes.
Opening When “MCE Controlled” is checked, the following parameters determine what
action will cause the doors to open when the car arrives at a floor.
Mechanism:
• Automatic: With the presence of door open intent, doors shall open automatically upon
arrival at the floor. When the car is sitting idle, the doors will open and remain open.
• Momentary pressure on door open button: Doors shall not open automatically upon
arrival at a floor. Momentary activation of the door open button initiates door opening.
To Next Page
Loading...
Need help?
General