System Configuration tab
10-23
10
iControl DC
Choose Dynamic or User-Defined Parking
If you enable only dynamic parking,
iControl will automatically control park-
ing behavior for the car. If you enable
only user-defined parking, the floor
selection assigned the highest priority
will be the parking floor.
Floors assigned a priority from 1 to 4 are
recognized as lobby floors for purposes
or door behavior.
If there is only one car in this “group,”
you should assign only one floor per
parking configuration. If you assign
more than one floor, only the highest
priority floor will be selected for park-
ing. The priority setting is useful in
assigning lobby (1-4) or non-lobby (5+)
door behavior.
Dynamic Door Times Edit door behavior for cars parking at lobby and non-lobby
floors:
1. With dynamic parking enabled, select
either the Lobby or the Non Lobby row.
2. Click Edit.
3. Choose whether the car
should park with front and/
or rear doors closed, open,
or open for a number of
seconds, then closed.
4. Click OK after making set-
tings.
To Next Page
Loading...
Need help?
General