iView - System View
10-50 Manual # 42-02-7223
Per-Car Lock Out
On a per-car, per-floor, per-direction basis, this control determines which cars may respond to
the various hall call types.
1. Select Per-Car Lock Out (System > Security > Hall Calls > Per-Car Lock Out).
• Note: When Security is active, calls that have been locked by Per-Floor Security set-
tings will be indicated by light gray locks. Calls that are also locked by Per-Car Lock
Out settings will have a second dark gray lock added indicating the per-car settings.
2. Call type: Select a call type, Main, AUX or CFSS.
3. Floor, Car, Front/Rear, Up/Down: The car numbers are at the top of the columns. Click
in the row and column that selects the floor, car, front/rear, up/down hall call desired.
4. Click Lock or Unlock and OK in the dialog that appears.
Alternate selection methods
• Click in the Car box to select all floors and directions. Or, click in the Riser box to select all
calls for that riser.
• Choose the desired setting
• Click OK to set all selected calls the same.
Or,
• Click and drag in a column or row to make multiple selections.
• Click Set Selection.
• Choose the desired setting and click OK to set all selected calls the same.
• Click send to save your settings to iControl.
To Next Page
Loading...
Need help?
General