MCE iControl User Manual

System Configuration tab
10-9
10
iControl DC
CFSS (Commandeer for Special Services)
This tab allows you to set car recall floor eligibility for Commandeer For Special Service opera-
tion. Car behavior during CFSS recall and operation is determined on the Controller > Configu-
ration - Car operation > CFSS tab. Please refer to “Car Operation - CFSS Tab” on page 9-77.
To program a CFSS Configuration
• Select a CFSS configuration (1 through 2): Select the CFSS configuration you wish to edit.
• Maximum number of cars to operate on CFSS Mode “n” at the same time: Set the number
of cars allowed to be in CFSS mode “n” at the same time. (Not pertinent to Simplex opera-
tion.)
• Allow multiple CFSS Mode “n” hall calls per car: If multiple CFSS recall hall switches are
simultaneously latched for this mode, they will be serviced (recall/CFSS in-car/release) in
the sequence in which they were registered.

MCE iControl Specifications

General

Brand	MCE
Model	iControl
Category	Controller
Language	English