EasyManuals Logo

MCE iControl User Manual

Default Icon
806 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #537 background imageLoading...
Page #537 background image
Configuration - Car Operation
9-59
9
iControl DC
Fire Code - In-Car - Front / Rear Tabs
Determine how the doors shall open and close during Fire Service - In-Car operation.
At Recall Floor - Away from Recall Floor Determine how the doors shall open
and close when the car is at the recall floor and when the car is away from the recall floor. The
parameters and descriptions are the same for both At Recall Floor and Away From Recall Floor
and for both Front and Rear tabs.
Opening When “MCE Controlled” is checked, the following parameters determine what
action will cause the doors to open when the car arrives at a floor.
Mechanism:
Automatic: With the presence of door open intent, doors shall open automatically upon
arrival at the floor. When the car is sitting idle, the doors will open and remain open.
Constant pressure on door open button: Doors shall not open automatically upon arrival
at a floor. Constant pressure activation of the door open button is required to open the
doors. If the door open button is released before the doors are fully open, the doors shall
re-close.
Momentary pressure on door open button: Doors shall not open automatically upon
arrival at a floor. Momentary activation of the door open button shall initiate opening the
doors.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MCE iControl and is the answer not in the manual?

MCE iControl Specifications

General IconGeneral
BrandMCE
ModeliControl
CategoryController
LanguageEnglish