MCE iControl - Car Calls - Configuration

Configuration Tabs - Security
10-51
10
iControl DC
Car Calls - Configuration
Car calls may be Unlocked, Locked or Secured:
• Unlocked: Unrestricted access. Calls may be registered.
• Locked: No access. Calls may not be registered.
• Secured: Access is restricted to authorized passengers. Calls may be registered after proper
authorization (i.e., card reader, key switch, or code entry).
To set car call security restrictions:
1. Display the System > Security > Car Calls > Configuration.
2. Select the security Configuration (1 - 8) to which the car call security restrictions apply.
3. For the car call type (front/rear), click in the table at the floor and car panel location
(front/rear) to be set.
4. In the selection list that appears, select the desired security condition (Unlock/Lock or
Secure.
5. If Secure is selected, choose the desired enable method or methods that will allow car
calls to be registered.
• Enable 1: Car call enable 1 input activation.
• Enable 2: Car call enable 2 input activation.
• COP Passcode: Passcode entered via the Car Operating Panel buttons.
• A combination of the above (see Security Symbols on the next page).