iView - System View
10-48 Manual # 42-02-7223
Hall Calls
iControl security provides two types of hall call restrictions:
• Per-Floor Security: Places restrictions on hall call riser access on a per-floor basis.
• Per-Car Lock Out: Specifies which cars may stop at particular floors.
Per-Floor Security
Hall calls may be Unlocked, Locked or Secured:
• Unlocked: Unrestricted access. Calls may be registered.
• Locked: No access. Calls may not be registered.
• Secured: Access is restricted to authorized passengers. Calls may be registered after proper
authorization (i.e., card reader, key switch, or code entry).
To set per-floor hall call security restrictions:
1. Select Per-Floor Security (System > Security > Hall Calls > Per-Floor Security).
2. Configuration: Select the security Configuration (1 - 8) to which the hall call security
restrictions apply.
3. For the hall call type (i.e., Main, Auxiliary, etc.) and location (Front/Rear), click in the
table at the floor and direction (up/down) to be set.
To Next Page
Loading...