MCE iControl User Manual

Configuration - Car Operation
9-57
9
iControl DC
• Fire Phase II hold conditions: One of the following conditions is required to put the car on
Fire Phase II Hold when the switch is turned to the Hold position.
• Never: Never put the car on Fire Phase II Hold.
• Not on Phase I: Initiate Fire Phase II Hold if Fire Phase I is not active.
• Not on Phase I and doors open: Initiate Fire Phase II Hold if Fire Phase I is not active
and the elevator doors are fully open.
• Unconditional hold: Put the car on Fire Phase II Hold unconditionally.
• Doors open hold: Initiate Fire Phase II Hold only if doors are fully open.
• Phase I and doors open: Put the car on Fire Phase II Hold if Fire Phase I is active and
the doors are fully open.
• Put car on Fire Phase II when: One of the following conditions is required to activate in-
car firefighter operation when the in-car fire fighter switch is activated
• Unqualified: Put the car on Fire Phase II unconditionally.
• Recall completes: Put the car on Fire Phase II when the recall is complete.
• Recall completes and Primary ON: Put the car on Fire Phase II when the recall is com-
plete and the Primary Fire recall switch is in the ON position.
• Take car off Fire Phase II when: One of the following conditions is required to take the car
off in-car firefighter operation.
• Unqualified: Take car off Fire Phase II when the in-car switch is deactivated.
• Recall completes: Take car off Fire Phase II when the recall is complete and the in-car
switch is deactivated.
• Recall completes and Primary ON: Take the car off Fire Phase II when the recall is
complete, the in-car switch is deactivated and the Primary Fire Recall switch is in the
ON position.
• Primary OFF: Take the car off Fire Phase II when the Primary Fire Recall switch is in
the OFF position.
• Put car on Fire Phase II during Fire Phase II recall when: One of the following conditions
is required to put car on Phase II during Phase II recall if Phase II Switch is reactivated.
• None: Never re-initiate Phase II once Phase II recall has been activated.
• Unconditional: Phase II will be re-activated unconditionally.
• Doors are not closed: Phase II will be re-activated only if the doors are not closed.
• Doors not closed away from recall floor: Phase II will be re-activated only if the car is
away from the recall floor and the doors are not closed.
• Put car on Phase II hold when: One of the following conditions is required to activate Fire
Phase II Hold.
• Never: Never activate Phase II Hold.
• Not on Phase I: Initiate Phase II Hold if Phase I is not activated.
• Not on Phase I and doors open: Initiate Phase II Hold if Phase I is not activated and
the doors are fully open.
• Unconditional hold: Phase II Hold will be activated unconditionally.
• Doors open hold: Phase II Hold will be activated only if the doors are fully open.
• Phase I and doors open: Phase II Hold will be activated only if Phase I is active and the
doors are fully open.
• Primary OFF and doors open: Phase II Hold will be activated only if the Primary Fire
Recall switch is in the OFF position and the doors are fully open.

MCE iControl Specifications

General

Brand	MCE
Model	iControl
Category	Controller
Language	English