Configuration - Car Operation
9-71
9
iControl DC
EMS Switch ‘n’ - Front / Rear Tabs The EMS - Front and Rear parameters deter-
mine how the front and rear doors will operate during EMS Operation. The parameters and
descriptions are the same for both Switch 1 and 2 and for both Front and Rear tabs.
Opening - After Car Arrives At Recall Floor When “MCE controlled” is checked,
the following parameters determine what action will cause the doors to open when the car
arrives at a floor.
Mechanism:
• Automatic: With the presence of door open intent, doors shall open automatically upon
arrival at the floor. When the car is sitting idle, the doors will open and remain open.
• Constant pressure on door open button: Doors shall not open automatically upon arrival
at a floor. Constant pressure activation of the door open button is required to open the
doors. If the door open button is released before the doors are fully open, the doors shall
re-close.
• Momentary pressure on door open button: Doors shall not open automatically upon
arrival at a floor. Momentary activation of the door open button initiates door opening.
To Next Page
Loading...
Need help?
General