MCE iControl User Manual

System Configuration tab
10-31
10
iControl DC
• Enable split bank operation: When this box is checked, Split Bank operation is enabled.
Though enabled, it may or may not be active. It can be made active as described below.
• Split Bank operation may be activated through iView manually by selecting manual
assignment and the appropriate hall call eligibility configuration on the Dispatching
screen Configuration tab. Split bank must be enabled.
• Split Bank operation may be activated by timer selection of a hall call eligibility config-
uration when split bank is enabled.
• Split Bank operation may be activated manually by switch input. (Highest activation
priority rests with this switch.) Split bank must be enabled.
• Split Bank operation may be deactivated manually by switch input. (Highest deactiva-
tion priority rests with this switch. When this switch is active, regardless of how Split
Bank activation was invoked, it will be shut off.)
• Select Hall Call Configuration (1 thru 8): Select a Hall call configuration here.
• Riser hall call conversions
• Convert “xxx” riser to: In the selection boxes, pick the risers to be emulated when the
displayed hall call configuration is active. The options are:
•None
•Front main
•Rear main
•Front aux
•Rear aux
•Front main B
•Rear main B
•Front aux B
•Rear aux B

MCE iControl Specifications

General

Brand	MCE
Model	iControl
Category	Controller
Language	English