Predictive Gongs
10-77
10
iControl DC
Lanterns The Lanterns controls include a graph showing the start times for the flash
options and the lantern Configuration controls:
• On Assignment: The lanterns can be used to indicate that the car has been assigned a call.
Select Slow flash, Fast flash, Solid or None (the start time for the selected option is
advanced to the maximum setting, 300 seconds).
• Start: Use these timers to specify when the lantern should start to flash at the selected rate:
• Slow flash when ETA is less than or equal to ___ seconds: Set the desired time.
• Fast flash when ETA is less than or equal to ___ seconds: Set the desired time.
• Solid when ETA is less than or equal to ___ seconds: Set the desired time.
To Next Page
Loading...