Send document comments to nexus7k-feedback-doc@cisco.com
2-65
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
BIOS_DAEMON Messages
Error Message BGP-6-EXIT_RESTART Format: BGP process exiting due to manual restart
Explanation The indicated BGP process is being restarted.
Recommended Action No action is required.
Error Message BGP-6-EXIT_UNKNOWN Format: BGP process exiting due to unknown reason
Explanation The system has detected an error.
Recommended Action No action is required.
Error Message BGP-6-MEMSTAT Format: Hit low memory condition - Free: %u MB, Min
free: %u MB
Explanation The system has detected an error.
Parameters: Current The system free memory, Minimum The system free memory ...
Recommended Action No action is required.
Error Message BGP-6-PATH_MAXASLIMIT Format: [%s] Path for %s/%d from peer %s found
to %s the maxas-limit
Explanation The system has detected an error.
Parameters: Address family, Prefix Masklength, EBGP Peer that sent the route, Maxas-limit check
result ...
Recommended Action No action is required.
Error Message BGP-6-START Format: BGP process %s startup, reason: %s
Explanation The indicated BGP process has started.
Parameters: Process name, Reason ...
Recommended Action No action is required.
BIOS_DAEMON Messages
This section contains the BIOS_DAEMON messages.