Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-217
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FDMI Messages
Error Message FDMI-3-MTS_API_ERROR: API, [chars] returned [hex]
Explanation FDMI invoked API [chars], received the error code specified in 0x[hex].
Recommended Action No action is required.
Error Message FDMI-3-MTS_FORMAT_ERROR: Unknown MTS message format in opcode [dec]
from module [chars]
Explanation FDMI received message from module [chars] which contains unknown message
format. MTS opcode is specified in [dec].
Recommended Action No action is required.
Error Message FDMI-3-NO_RESPONSE: No response from switch whose domain id is [dec]
Explanation FDMI process sends an inter-switch packet to switches and has not received the
response.
Recommended Action No action is required.
Error Message FDMI-3-PSS_ERROR: PSS operation [chars] returned err: [hex]
Explanation [chars] specifies the context where the failure occurred and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message FDMI-3-UNEXPECTED_MTS_MSG: Unexpected MTS message, opcode [dec], is
received
Explanation FDMI process received unexpected MTS event. MTS opcode is specified in [dec].
Recommended Action No action is required.
FDMI-4
Error Message FDMI-4-SW_REJ_RESPONSE: Reject response [chars] from switch whose
domain id is [dec]
Explanation FDMI process sends an inter-switch packet to switches and has received the reject
response with the reason code in [chars].
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English